Factory source Checking Fixture Component - Roof checking fixture-R1900 – TTM
Factory source Checking Fixture Component - Roof checking fixture-R1900 – TTM Detail:
Function
For Roof quality inspection control and support to improve the automotive production line capacity rate.
Application Fields
Automotive industry quality control.
Automotive production line production capacity improve.
Specification
Fixture Type: |
Roof checking fixture |
Size: |
2530*1980*1570mm |
Weight: |
1600 kg |
Material: |
Main Construction: metal Support: metal |
Surface treatment: |
Base Plate: Electroplating Chromium and Black Anodized |
Detailed Introduction
At present, in the development of commonly used car roof projects, in order to enrich the choices of consumers, vehicle companies usually introduce a variety of model configurations for everyone to choose from, which makes some auto parts have different configurations in the same model. There are some similar differences, especially in the car roof , which usually include panoramic sunroof ceiling, small sunroof ceiling, non-sunroof ceiling, etc., which makes it necessary to make multiple inspection tools when developing roof products with different configurations of the same model. Testing whether the roof is qualified is basically equivalent to developing multiple products in terms of cost. The processing cost of multiple products individually designed is high and takes up a lot of factory storage space.
By dividing the inspection tool simulation block into an edge detection simulation block and a middle detection simulation block, the edge detection simulation block is used to detect the edge of the roof , and the middle detection simulation block is used to detect the protrusion in the middle of the roof , so as to realize the detection of different parts of the car; The detection simulation block is detachable and installed. When in use, the corresponding central detection simulation block can be replaced according to the local difference of the roof structure only, so that the entire inspection fixture structure only needs to replace the central detection simulation block. It can realize the detection of the ceiling of different models, reduce the design and processing cost, and at the same time, when the equipment is stored, it can greatly reduce the occupied space and improve the utilization rate of factory space.
Operation Sequence
1.Visual inspection to check part sharp edges ,cracks and burrs.
2.Using GO/NOGO to detect the size of hole of product.
3.Open the clamp and flip mechanism,Put the product on the main body.
4.Adjust the product so that it is in good contact with zero stickers.
5. Close the clamp and flip mechanism in sequence.
6.using the feeler 1(GOSØ2.5/NOGO Ø3.5)to check the profile 1.0mm.
7.using the feeler 2(GO Ø7.5/NOGO Ø8.5)to check the profile 1.0mm.
8.using the feeler 3(GO Ø7.0/NOGO Ø9.0)to check the profile 2.0mm.
9.using the feeler 4(GOSØ1.5/NOGOSØ4.5)to check the profile 3.0mm.
10.Use ±0.5 to detect the edge of the product.
11.Recording results on the inspection sheet.
12.Unclamping and removing part.
Product detail pictures:
Related Product Guide:
We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Factory source Checking Fixture Component - Roof checking fixture-R1900 – TTM , The product will supply to all over the world, such as: Bolivia, Bangkok, Melbourne, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.
By Agnes from Atlanta - 2018.10.01 14:14
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Brook from Bangkok - 2018.10.01 14:14