2022 China New Design Automotive Tooling - Custom Precision Manufacturing Parts High Pressure Metal Press Molds Casting and steel Transfer Die – TTM
2022 China New Design Automotive Tooling - Custom Precision Manufacturing Parts High Pressure Metal Press Molds Casting and steel Transfer Die – TTM Detail:
Function
The transfer die can be transmitted by the manipulator, which greatly improves the production efficiency, reduces the production and manufacturing cost, and saves the material cost. The transfer die combines the advantages of single process die and progressive die, and has the characteristics of quality safety, stability and reliability.
Characteristic
Transfer die can improve the method of low casting efficiency, the specific steps are 1) when the first mold is filled with low pressure casting, transfer the filled first mold, bring the second mold not filled to the filling position, the second mold filling; (2) In the process of filling the mold that is not filled, open and close the mold that is filled and solidified, and repeat steps (1) and (2). The invention can effectively improve the production efficiency of low-pressure casting, transfer the process of casting condensation and mold opening and closing, realize the time optimization of production technology, and further promote the application scope of low-pressure casting.
Product Details
Detailed Introduction
This is a Casting Transfer Die, totally in 5 sets, we made for our Canada customer. The piecework movement of multi-station press is realized by the three-dimensional movement of the small shovel or clamp fixed on the feed rod (beam). When designing the mold and gripper, it is necessary to check whether there is interference in the mold and gripper (clip) and the parts in advance.
The reference point of inspection should be selected at the point with the worst interference condition of the mold. The reference point of the front view is the uppermost front end of the gripper, as shown in the figure above. Special attention should be paid to whether there is interference when there is a hanging rod at the mark.
If the area a≥40mm, do not arrange parts that are too high to avoid interference.This figure mainly shows the process of the small shovel entering the mold for clamping parts and sending them to the lower sequence mold. The design should ensure that there is no interference in the left and right areas and the bottom area A ≥40mm during the entry process of the small shovel, and there is no interference in the process of lifting 200 and sending it to the lower sequence.
The movable object as follows: die wedge slider, supporting core, blank holder, top piece, etc., must be checked for interference in the state to be moved Whether the clearance with the lower die parts (guide column, positioning plate, buffer device, wedge slider, wedge drive block, wedge travel backplane, top piece, etc.) is A ≥40mm if the clearance is met, there will be no interference.
The check point is the most front and the lowest part of the gripper, and the space is ≥40mm. The parts are to be clamped. In the process of clamping and lifting outward, attention should be paid to the interference under the gripper, the gripper support rod and the parts.
The Working Flow
1. Received the purchasing order -——-> 2. Design -——-> 3. Confirming the drawing/solutions -——-> 4. Prepare the materials -——-> 5. CNC -——-> 6. CMM -——-> 6. Assembling -——-> 7. CMM-> 8. Inspection -——-> 9. (3rd part inspection if need) -——-> 10. (internal/customer on site) -——-> 11. Packing(wooden box) -——-> 12. Delivery
Lead time & Packing
45 days after 3D design approved
5 days via express: FedEx by Air
Standard Export Wooden Case
Product detail pictures:
Related Product Guide:
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for 2022 China New Design Automotive Tooling - Custom Precision Manufacturing Parts High Pressure Metal Press Molds Casting and steel Transfer Die – TTM , The product will supply to all over the world, such as: Sudan, Mexico, Serbia, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our professional experience and high quality grades will contribute to your business.
By Renata from Macedonia - 2018.12.25 12:43
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Myra from Roman - 2018.12.30 10:21